Naas Ferreira – Bergstrom Industries

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the astra-addon domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/bergstromm/wpt.bergstromm.com/wp-includes/functions.php on line 6131

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the slider domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/bergstromm/wpt.bergstromm.com/wp-includes/functions.php on line 6131

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the page-views-count domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/bergstromm/wpt.bergstromm.com/wp-includes/functions.php on line 6131

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/bergstromm/wpt.bergstromm.com/wp-includes/functions.php on line 6131

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-stats-manager-pro domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/bergstromm/wpt.bergstromm.com/wp-includes/functions.php on line 6131
Naas Ferreira – Bergstrom Industries https://wpt.bergstromm.com Waterproofing and Leak Specialists Thu, 08 Jul 2021 17:07:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://wpt.bergstromm.com/wp-content/uploads/2018/06/cropped-Bergstrom-icon-32x32.jpg Naas Ferreira – Bergstrom Industries https://wpt.bergstromm.com 32 32 Super Silicone Seal https://wpt.bergstromm.com/super-silicone-seal/ https://wpt.bergstromm.com/super-silicone-seal/#comments Tue, 20 Aug 2019 22:12:05 +0000 https://bergstromm.com/?p=1986 Super Silicone Seal has been formulated to protect all roofs against heat and ultraviolet. This product will adhere to Metal, Modified Bitumen, EPDM Rubber, and TPO.

A roller, brush, airless sprayer can be used to apply Super Silicone Seal. When used in conjunction with polyester fleece, Super Silicone Seal can be used as a flashing detail or seam repair.

Watch this video made by Flat Roof Doctor on how to apply Super Silicone Seal over seams and also painting an EPDM Rubber.

Here are some specs of Super Silicone Seal:

Bergstrom Industries — Super Silicone Seal

The repair of seams, cracks and flashing with Super Silicone Seal

Use a steel wire brush to scrub the surface. (remove dust)
Use masking tape to tape off 21/2″ from either side of seam or crack (optional, but looks clean when done)
Measure and cut the correct length of fleece
Brush 1 thick coat either the Turbo Poly Seal or Super Silicone Seal on both sides of crack or seam
Embed the polyester fleece into the freshly painted coat (make sure there are no wrinkles)
Apply another coat over the fleece making sure the fiber doesn’t show
Remove the masking tape

Picture Instructions on how to make flashing repair with Super Silicone Seal:

Start by using masking tape to mark the area where the Super Silicone Seal flashing detail will be done. Clean the surface area with a rag.

Super Silicone Seal for vent flashing — Preparing the surface by taping off where the Super Silicone seal will be installed

2. Measure and cut to size the polyester fleece to be installed with Super Silicone Seal

3. Apply the first coat by using a brush of Super Silicone Seal over the pipe and roof area.

Apply first coat of Super Silicone Seal over pipe and roof area — Apply the first coat of Super Silicone Seal over pipe and roof area

4. Cut tabs into the Super Silicone Fleece about 2 inches long.

Cut tabs about 2 inches deep in the measured fleece

5. Install Fleece around the pipe with tabs spread around lying flat on the roof.

Install Fleece around pipe with tabs spread around on the roof — Install Fleece around the pipe with tabs spread around on the roof

6. Apply a final coat of Super Silicone Seal covering the fleece completely

Apply final coat of Super Silicone Seal covering the fleece completely — Apply a final coat of Super Silicone Seal covering the fleece completely

7. Repairing a seam on an EPDM Rubber Roof with Super Silicone Seal. Tape off area to avoid spillover

8. Apply a thick coat of Super Silicone Seal covering more than 2 inches either side of EPDM Rubber Seam

9. Install a fleece and then paint a final coat of Super Silicone Seal covering the fleece

10. Remove the masking tape immediately after completing the coating of Super Silicone Seal

11. The Super Silicone Seal will be touch dry after 30 min but need another 24 hours to cure.

The Super Silicone will be touch dry after 30 min but need another 24 hours to cure

]]> https://wpt.bergstromm.com/super-silicone-seal/feed/ 53